Spray-n-Bond
Description:
This wide web spray adhesive is one of the highest performance aerosol adhesives available. Formulated specifically for insulation and duct liner applications, this high solids product is ideal for uneven or porous surfaces and weight materials such as insulation and duct liner surfaces. Waterproof, flexible, transparent and non-staining, and it can be used for both temporary or permanent bonds. Formulated with the environment in mind, this product contains NO CHLORINATED SOLVENTS OR OZONE DEPLETERS.
Spray-n-Bond-LV (low voc) meets or exceeds California VOC limits.
Use it for your toughest adhesive applications, including leather, cardboard, most plastics and cloth. Cleans easily with degreasing solvent (mineral spirits). Not intended for use on vinyl.
Packaging Size | Part Number | Additional Info |
---|---|---|
12 ounce can | 4369-75 | |
LV - 12 ounce can | 4369-85 |
Directions:
Always shake well before using. Never aim valve at face. Hold can upright and apply adhesive in a side to side motion 10 to 13 inches from surface.
TEMPORARY BONDS: Spray surface, allow to tack and apply material to be bonded.
PERMANENT BONDS: Liberally spray both surface and material, allow to tack, then apply.
CLEANING SPRAY TIP: When finished with a particular spray application, always turn can upside down and spray for two seconds to clear valve and prevent clogging. If adhesive accumulates around nozzle wipe clear while wet. If dried in valve opening, remove with degreasing solvent.
Product Information:
Literature Downloads
Download the product bulletin and other relevant literature here.
- AEROSOL, SPRAY-N-BOND 6X12 OZ CASE Product Bulletin
- AEROSOL, SPRAY-N-BOND 6X12 OZ CASE Application Bulletin
- AEROSOL, SPRAY-N-BOND LV 6X12 OZ CS Product Bulletin
- AEROSOL, SPRAY-N-BOND LV 6X12 OZ CS Application Bulletin
Labels
Download a low resolution file of the product label here.
Product Safety
- 4369_SDS_ENG_20230422
- 4369-85_SDS_ENG_20200421