Evap-Fresh No Rinse Evaporator Coil Cleaner and Disinfectant

Evap-Fresh No Rinse Evaporator Coil Cleaner and Disinfectant

SKU: 4166-01

Kills SARS-CoV-2 on hard non-porous surfaces

Kills the virus that causes common cold††

Kills H1N1 Influenza A Virus

Ready-to-use disinfectant spray

Kills 99.9% of germs*

EPA registered

Product Description

This product is a one-step^*,1 hospital-use germicidal disinfectant cleaner and deodorant designed for general cleaning, disinfecting, and controlling non-pathogenic mold and mildew on hard, non-porous inanimate surfaces. Quickly removes dirt, grime, non-pathogenic mold and mildew, food residue, blood, and other organic matter commonly found in hospitals. It also eliminates odors leaving non-porous surfaces smelling clean and fresh. Use where odors are a problem. EPA registered.

^*When used according to disinfection directions.

¹ “One Step” claim is limited to association with non-food contact hard non-porous surface use.

COOLING COILS DISINFECTANT CLEANER: This product is a ready-to-use, non-abrasive disinfectant cleaner for small air conditioner, commercial air handling unit and HVAC cooling coils and refrigeration equipment evaporation coils. When using this product to disinfect and clean cooling coils and evaporation coils, disconnect power to the unit and allow hard non-porous surfaces to come to room temperature before applying product.

THE QUART SIZE IS A DISCONTINUED ITEM – MAY BE AVAILABLE AT SELECT WHOLESALERS WHILE SUPPLIES LAST.

Directions

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. This product is not for use on critical or semi-critical medical device surfaces. Fill or refill the 32 ozs. Evap-Fresh No Rinse Evaporator Coil Cleaner & Disinfectant spray bottle with Evap-Fresh No Rinse Evaporator Coil Cleaner & Disinfectant refill. Pour product into spray bottle over sink or tub basin.

DISINFECTION, DEODORIZING,AND CLEANING

Remove gross filth or heavy soil prior to application of the product. Hold container six to eight inches from surface to be treated. Spray area until it is covered with the solution. Allow product to penetrate and remain wet for 3 minutes. No scrubbing is necessary. The product will not leave grit or soap scum. Using approved AOAC test methods, in the presence of 5% blood serum and a 3 minute contact time, unless otherwise noted, this product kills the following organisms on hard non-porous inanimate surfaces:

BACTERICIDAL ACTIVITY
When used as directed, Evap-Fresh No Rinse is an effective disinfectant against the following organisms on hard, non-porous inanimate surfaces:
• Escherichia coli • Streptococcus pyogenes
• Salmonella (typhi) enterica • Salmonella (choleraesuis) enterica
• Pseudomonas aeruginosa • Listeria monocytogenes • Staphylococcus aureus

TUBERCULOCIDAL ACTIVITY

This product exhibits disinfectant efficacy against Mycobacterium tuberculosis
BCG at 20ºC when the treated surface is allowed to remain wet for 5 minutes.

VIRUCIDAL ACTIVITY

This product kills on hard, non-porous inanimate surfaces when allowed to
remain wet for a 10 minute contact time against: Hepatitis A Virus (HAV). This
product, when used on environmental, inanimate hard surfaces exhibits virucidal
activity against: Human Coronavirus, SARS associated Coronavirus, and Avian
Influenza A strains H3N2 and H9N2 for 2 minutes; Rhinovirus type 39 (ATCC
VR-340) and Rotavirus for 3 minutes. Kills Pandemic 2009 H1N1 Influenza A virus
(formerly called swine flu).

MILDEWSTAT

To control mold and mildew on pre-cleaned, hard, non-porous surfaces spray

surface to be treated making sure to wet completely. Let air dry. Repeat
application at weekly intervals or when mildew growth appears.