Blackhawk

SKU: 4127-08

NSF approved for cleaning HVAC/R coils in food processing areas

Safe for use on microchannel coils

Fragrance-free with no objectionable fumes

Effective on grease, grime, and debris

Non-Rinse for evaporators

Nonflammable and biodegradable

Meets OEM standards for cleaning coils

Available in a traditional gallon and expanding foam aerosol

Product Description

Blackhawk® Evaporator and Condenser Coil Cleaner is specially engineered to remove grease, grime, and other soils commonly found on HVAC coils. It’s safe for use in occupied buildings with no objectionable fumes, making it ideal for various commercial applications like refrigerators, coolers, and freezers. This versatile cleaner is safe and effective on both traditional and microchannel coils.

Blackhawk aerosol is an expanding foam, non-fragrance coil cleaner for HVAC/R applications. The product’s expanding foam permeates deep within the coil then liquefies to quickly remove grease, grime, and other oily surfaces. Blackhawk’s heavy-duty formulation is powerful, yet safe and problem-free in food processing areas – producing no objectionable fumes.

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

Goggles, gloves and other protective garments should be worn when using this product. System must be shut off.
Use the popular Nu-Calgon Coil Gun (product bulletin 3-454) or Nu-Calgon 50P, 200P, 300P or 120CP, 220CP low pressure plastic sprayers. The 50P sprayer provides a very ergonomical application for many commercial and kitchen application. See product bulletin 3-450 for instructions on adjusting the nozzle to a foam applicator.
For low pressure sprayers, prepare proper cleaning solution based on the dilution chart by mixing Blackhawk water. Add the water to the sprayer first, then add Blackhawk.
Spray solution onto dirty surface and allow it to remain in contact for 5-10 minutes. Rinse thoroughly with water. Consider applying a coating of Cal-Shield, a coil protectant.
Rinse out sprayer, spraying wand and nozzle.
Evaporators: Traditional Blackhawk can be used in a nonrinse application by preparing one part cleaner with 20 parts water and apply with a sprayer, provided there is ample humidity being condensed to provide rinsing.
Additional Cleaning Applications and Routine Maintenance: Add one part of traditional Blackhawk to each 20 parts of water. Allow parts to soak for 15 minutes and then rinse thoroughly with water.

Product Information