Nu-Brite Ultra Concentrate

SKU: 4291-92

No. 1 Coil Cleaner in the HVACR Industry!

Cuts through grease and grime better than acids

High foaming chemistry to lift dirt out of coil

Brightens the condenser coils extremely well

Available in traditional and concentrate formulas

Concentrate packages take up less space and are easier to carry or ship

Product Description

When choosing a coil cleaner, reach for the BLUE!

Nu-Brite is a non-acid, alkaline-based product for cleaning and brightening air cooled condensers. It is formulated with the best available foaming detergents and chelants to quickly penetrate and dissolve greasy dirt and grime and foam it right out of the coil. The safer alternative to acids.

For cleaning and brightening air cooled condensers and other finned heating and cooling coils located outside. It is an alkaline based cleaner that does all that an acid will do without the danger of an acid. Nu-Brite’s state-of-the-art surfactants and cleaners instantly penetrate and lift layers of oily grime and corrosive deposits from the coil. Its foaming action pushes this loosened debris out of hard-to-reach areas restoring equipment to peak efficiency. It is not recommended for indoor use.

Nu-Brite Ultra Concentrate delivers the heavy-duty performance of our Nu-Brite product in an ultra-concentrate form. The ultra-concentrate quart reduces space and weight by 75% when storing on your truck or transporting to rooftop or remote coils. Nu-BriteUltra Concentrate can be mixed traditionally or used with Nu-Calgon’s Coil Gun at a 10:1 (setting E) dilution.

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

DO NOT USE ON INDOOR OR ALUMINUM COILS. FOR OUTDOOR USE ONLY. DOES NOT CONTAIN ACID. 

  1. Disconnect power from equipment. Goggles, gloves and other protective gear must be worn when using this product.
  2. Identify your application and prepare proper dilution based on the Dilution Chart. When using Nu-Calgon Coil Gun, set to E (10:1).
  3. Spray cleaning solution on to dirty coil, allowing solution to emulsify and break down grease and grime for 5-10 minutes.
  4. Rinse thoroughly with water and return unit to service. 

*Not compatible with Clean Connect Sprayer

Product Information
Item Packaging Size Case Quantity Description
1 Quart 4.0  

Related Products

Up-Sells Products