Spray-N-Bond

SKU: 4369-75

Formulated specifically for insulation and duct liner applications

Wide web spray pattern

Temporary or permanent bonds

Fast tack… quick adhesion

Waterproof & non-staining

Non-chlorinated and non-ozone depleting

4369-85 meets or exceeds California VOC limits

Product Description

This wide web spray adhesive is one of the highest performance aerosol adhesives available. Formulated specifically for insulation and duct liner applications, this high solids product is ideal for uneven or porous surfaces and weight materials such as insulation and duct liner surfaces. Waterproof, flexible, transparent and non-staining, and it can be used for both temporary or permanent bonds. Formulated with the environment in mind, this product contains NO CHLORINATED SOLVENTS OR OZONE DEPLETERS.

Spray-n-Bond-LV (low voc) meets or exceeds California VOC limits.

Use it for your toughest adhesive applications, including leather, cardboard, most plastics and cloth. Cleans easily with degreasing solvent (mineral spirits). Not intended for use on vinyl.

Directions

Always shake well before using. Never aim valve at face. Hold can
upright and apply adhesive in a side to side motion 10 to 13 inches from
surface.

TEMPORARY BONDS: Spray surface, allow to tack and apply material to be bonded.

PERMANENT BONDS: Liberally spray both surface and material, allow to tack, then apply.

CLEANING SPRAY TIP: When finished with a particular
spray application, always turn can upside down and spray for two seconds
to clear valve and prevent clogging. If adhesive accumulates around
nozzle wipe clear while wet. If dried in valve opening, remove with
degreasing solvent.

Product Information