This product must be used in accordance to the following directions by HVACR professionals only.
1. Disconnect power from equipment. Goggles, gloves and other protective gear must be worn when using this product.
2. Identify your application and prepare proper dilution based on Dilution Chart. When using Nu-Calgon Coil Gun, set to E (10:1).
3. Spray cleaning solution on dirty coil, allowing solution to emulsify and break down grease and grime for 5-10 minutes.
Rinse thoroughly with water and return unit to service.
EVAPORATORS: No rinse is optional when returning unit to cooling mode.
*Not compatible with Clean Connect Sprayer