Tri-Pow’r HD 4X Concentrate

Tri-Pow’r HD 4X Concentrate

SKU: 4371-90

For cleaning air-cooled condensers/ evaporators, permanent filters, fan blades and more!

Detergent-Degreaser-Deodorizer

Ideal for microchannel

Suitable for any coil design

Rapid emulsification of grease and grime

Metal safe - can be used for evaporator no-rinse applications per instructions where ample condensate will self-rinse coil

Product Description

The ideal environmentally friendly and biodegradable cleaner that’s perfect for cleaning air-cooled condensers, evaporator coils, permanent filters, fan blades, motors and other general cleaning needs. Tri-Pow’r is a heavy duty alkaline cleaner that is very unique when compared to other similar alkaline coil cleaners. It’s based upon positive emulsion technology which is the most effective technology used for removing grease and grime. Tri-Pow’r emulsifies or converts greasy deposits into a fluid or liquid form that can be easily flushed. It also contains a surfactant for “wetting” the greasy deposits as well as corrosion inhibitors for protecting equipment surfaces. It’s non-acid, non-toxic, biodegradable and very safe to use and it’s a deodorizer as well.

Tri-Pow’r 4X is a new concentrate version available in a ready-to-use quart bottle. One concentrate quart equals one gallon traditional Tri-Pow’r (at 4:1 dilution use). Tri-Pow’r HD 4X takes less space on truck, is easy to carry on roofs, and has cleaner connecting – no more pouring or spilling. The specially developed packaging has a dilution insert assembly; simply use what is needed, cap bottle and use for another job. The product ships as a limited quantity – easier to get to the job site. Tri-Pow’r HD 4X requires the Clean Connect Sprayer.

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

Goggles, gloves and other protective garments should be worn when using this product. System must be shut off.

At the coil to be cleaned, open the bottle cap of Tri-Pow'r 4X. When opening the bottle, a small amount of residue might be present under the cap due to shipment – this is normal.
Hook the desired cleaning attachment to the Clean Connect Sprayer until it snaps firmly into place.
Hook up water supply with a water hose to the Clean Connect Sprayer, and open access valve to allow flow to sprayer.
Facing the coil, grab the bottle of the sprayer, without depressing handle, and the spray accessory end. Toggle to clean mode on sprayer (chemistry beaker image) while depressing the Clean Connect Sprayer handle to dispense the cleaner on the dirty outdoor coil. Allow dispensed cleaner to work for 5-10 minutes on the coil before rinsing.
Hook up the standard hose assembly until this assembly snaps firmly into place.
Toggle to rinse mode on sprayer (bucket image) and rinse coil thoroughly with water.
If the cleaner bottle was emptied, properly discard. If cleaner remains in the bottle, simply remove from the Clean Connect Sprayer and cap bottle so it can be used for a future cleaning.
Close access valve to stop water flow to sprayer, remove sprayer from hose and package Clean Connect Sprayer in supplied mesh nylon bag and store properly on vehicle to protect sprayer’s plastic components.
If desired, apply Cal-Shield, as a coil protectant by using a separate pump-up sprayer.
Return the equipment back to service. Warning: Never transport the Clean Connect Sprayer attached to coil cleaner bottle since leakage will occur.

PERMANENT FILTERS: When cleaning greasy components in a tub, add 1 ounce of Tri-Pow’r HD to each gallon of water. Allow parts to soak for 15 minutes then rinse thoroughly with water.

Product Information